How to Replace a Saab 9-3 Key
The Saab 9-3 is a fantastic car that is full of appeal for drivers. It offers good visibility and a powerful performance engine. It also has a great safety rating.
It is vital to have two keys that work for your vehicle. If you lose one key, it could be expensive to replace it with the new one.
How to Replace the Ignition Key in a Saab9-3
You'll must replace your car keys if it won't turn. This guide will walk you through the steps to do it on the Saab 9-3. You'll require a replacement key with a reprogrammable battery as well as a new key-fob cover.
The most modern Saab models use a transponder instead of a traditional key to unlock the car and begin it. The issue with this is that the reprogrammable battery in the key-fob eventually wears out and lose charge for long. This is especially relevant if you continue to use the same key for the same lock.
A professional locksmith can replace the battery quickly. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to separate the key-fob. This is done by inserting a flathead screwdriver into the slot that is located in the middle of the case. It is essential to be careful, as the plastic is thin and can be damaged easily.
After the case has been opened then you can prepare the new key by combining the lower half of the old key and the transponder and banana on the new key. This will ensure that the new key is mated to the CIM properly, which could make a huge difference when replacing the only key for your Saab 9-3.
How do you replace the ignition Key in a Saab 900
If you do not have two keys, you'll need to remove the dashboard and steering wheel to gain access to the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you are able to remove the dashboard and trim pieces around the steering wheel. After the dashboard is taken off, you can push a screwdriver into the opening on the back of the ignition switch and pull it out.
The ignition barrel has a key lock that can prevent the vehicle from starting if key isn't present in the. If the ignition switch isn't working correctly, make sure to check if the key is in the lock or inside the ignition barrel. It is also important to rotate your keys and keep them clean to avoid bending.
Saab cars differ from other cars in that they do not have traditional metal keys. The car instead recognizes the electronic signals coming from the key fob through a special microchip in it.
If saab 93 key G28 Car Keys have lost your only working key fob the dealer will charge you the most expensive dollar for replacing your computer module (known as the CIM). However, we can reprogram your computer's EEPROM, and then prepare it to accept new keys without replacing it. You'll save 50% on the dealer's cost! This is the SAAB Key PROGRAM. Find out more about it here!
How to Replace the Ignition Key on a Saab 9-5
The metal component of classic Saab keys is easy to copy and doesn't represent a significant risk to vehicle theft. The electronic part of the key-fob has an embedded chip that can identify the car when the key is inserted in the ignition switch.
Saab's anti-theft system has relied upon this technology for over 10 years. It's not as secure as an actual lock on the door, but it does make the process of stealing your vehicle harder. Every Saab owner must keep an extra Saab key in their vehicle.
Most new Saabs come with two keys at the factory, however you can add more at an agent using a handheld computer, called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is NG 9-3 vehicles, with more modern, more advanced features that require the use of a key-fob.
If you lose all keys in the event of a loss, the dealer will replace your CIM or TWICE modules, and charge you a premium for it. But we can reprogram the EEPROM in your existing computer and make it accept new keys, and not replace the expensive modules.
How to Replace the Ignition Key on a Saab XC90
If your SAAB 9-3 key fob starts having trouble turning the lock barrel it's possible that it's time to replace it. Fortunately, the process is relatively simple and doesn't require you to visit a dealer. Instead you can complete the process yourself at home by using the help of a few tools.
In the beginning, you'll need to prepare the new key. Before you start, ensure that the anti-theft device is disabled by placing blocks on the rear wheels and releasing the handbrake. Place the key in the ignition, and then turn it to the "on" position. This will activate the accessories but will not start the engine. Repeat this procedure 5 times, and then put the key on the "on" position.
You'll need to purchase a new case for your key fob. They can be found at a variety of auto parts stores and are generally inexpensive. Based on the model, you can even buy them without electronic components.
To open the case, gently push the flathead screwdriver into the slot in the middle. The case should break easily and, once you do, you'll have access to the internal electronics. To remove the electronics make use of a small screwdriver and try prying them out with a gentle force.